Release Notes for CCU2EN - Central Processor (CCP)

Product applicability

Applies to model CCU2EN (Central Control Unit for 2W EZComm Navigator) only.

CCP Firmware Download

Filename: 500-1008XZZ.ccp (X is the Major Value, ZZ is the Revision Value).

Note: Firmware can only be updated using the EZ APS ToolBox PC application and either a USB (Type A to B) or Ethernet cable plugged directly into the back of the CCU2EN.

CCP v4.10 (2015-03-09 TechBrief# 1040)

• Fix for the fault LED coming on after power up

CCP v4.09 (2015-02-26)

• Added 250ms delay before initializing the RTC

CCP v4.08 (2014-07-08)

• Fixed issues related to the Calendar
• Fixed an issue with calendar EEPROM address being calculated with a UCHAR instead of UINT

CCP v4.07 (2014-04-22)

• Fixed issues related to the Calendar:
  • Fixed the Jewish holidays
  • Recalculates all calendar and countdown events when setting time or changing calendar items

CCP v4.06 (2013-04-10)

• Make sure Power Loss fault does not occur unless power has been lost for at least 100ms

CCP v3.11 (2011-10-18)

• Check version number in SEEPROM on btoo to make sure it is current and rewrite if not. This makes sure that the version is correct even after reprogramming with Melabs.

CCP v3.10 (2011-10-06)

• Fixed Real Time Clock Trickle Charge Initialization Error - The real time clock requires 200ms (mac) after powerup before it becomes responsive to commands. A 360ms delay has been added to the main processor powerup before the RTC initialization routines are called to make sure the RTC will respond to commands.

CCP v3.09 (2011-08-24)

• Change VEN/DEV codes
• Added Getfilelist command

CCP v1.08 (2011-03-10)

• Add Data/PSM Fault for new feature change