Tech Brief #1040 - Fix Fault LED on Power-Up (CCU2EN)

Polara’s technical bulletins are intended to provide updates, clarification, and guidance on the installation and maintenance of our products. They convey relevant technical product information to our partners and customers. Please contact us if you have any questions about the content of this bulletin.

Originally posted 3/06/2015.

Product / Models Affected:

CCU2EN, EZ Communicator Navigator (EN2)

Situation:

Upon power-up the CCU2EN’s Fault LED may light up for 10-20 seconds. During this time, USB communication is not possible and CCU will respond slowly. Once the Fault LED turns off, normal operation will continue.

Solutions:

Updating the CCP firmware to v4.10 will fix this issue.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.