Release Notes for iNX/iDX Firmware
This article lists the release notes of the iNX/iDX Firmware.
Product applicability
Firmware file is the same for all iNX variants:
- iNX
- iDX
Filename: iNX_X_Y_Z.pfw (X is the Major Value, Y is the Minor Value, Z is the Revision Value)
iNX/iDX Firmware v1.1.0 (2024-03-19)
Critical Update
- Introduces Quite Time feature.
- New MUTCD 11th ed. compliant audio messages
- Adds a health log entry on user login and logout
- Bugfixes and stability improvements
iNX/iDX Firmware v1.0.8 (2022-08-11)
Critical Update
- Fixed an issue which could cause a unit to stop playing audio
iNX/iDX Firmware v1.0.7 (2021-11-22)
Critical Update
- Improved compatibility with additional RRFB systems.
iNX/iDX Firmware v1.0.6 (2021-07-29)
- Fix an issue with iDX detection during manufacturing (does not affect units after leaving manufacturing floor).
iNX/iDX Firmware v1.0.5 (2021-07-19)
- Implemented logging of button counter values to the health log at user-defined intervals
iNX/iDX Firmware v1.0.4 (2021-05-06)
- Corrected HW detection issue to address internal manufacturing test
iNX/iDX Firmware v1.0.3 (2021-04-05)
- Add wireless sync transmission when a flashing light input signal is received (independent of button press status)
iNX/iDX Firmware v1.0.2 (2021-02-03)
- Add iDetect Profile One with greater sensitivity (for iDX units)
- Fixed issue with button press mechanism which could cause delayed button presses in some units
iNX/iDX Firmware v1.0.1 (2020-12-03)
Critical Update
- Add compatability with iDetect (iDX) units
- Add ability to store and retrieve counts for button presses, wireless sync activations, iDetect activations, and flashing cycles
- Fixed issue with Speech Message Start Delay setting
- Fixed issue with Lights In Pulses of less than 50ms
iNX Firmware v1.0.0 (2020-07-21)
- Initial release of FW