What kind of signals can be activated by the iNX?

The iNX is compatible with most modern rectangular rapid flashing beacons (RRFBs), in-roadway warning lights, round pedestrian-activated beacons, and other approved pedestrian warning lights.

However, iNX only works with DC voltages. Listed below are the electrical requirements:

Terminals Requirement
PWR/GND 10-24 VDC (peak current draw ~500mA @ 15VDC)
BUTTON* 7-32 VDC
LIGHTS* 7-32 VDC†

* No polarity requirements

† Only active when warning lights are flashing

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.